check_circle

Assembly Parts

check_circle

Foam Tape

What's in the box?

Everything you need for the installation is provided in the box—no extra tools or materials are required.

For your convenience, you can either watch the installation video below or follow the detailed step-by-step written instructions beneath the video. Both options will guide you through the process to ensure a smooth installation of your Guard.

Four steps to assemble Guard

Step 1: Lay Out The Frames

1. Unpack all parts: Lay out the upper frame, lower frame, and side frames on a clean, flat surface.

2. Position the Upper and Lower Frames: Place the upper and lower frames parallel to each other on a horizontal surface.

Step 2: Attach The Frame Connectors

Attach one frame connector onto one end of the frame with the fabric, then attach the other connector onto the other end.

Step 3: Connect The Frames

Connect all of the frames together by connecting the fabric and the side frame with the upper and lower frames.

Step 4: Tighten The Cords

Pull one slider down inside the frame and push the other slider up to tighten the cords securely.

Four steps to assemble Guard

Step 1: Split The Foam Tape

Split the provided foam tape into two equal parts.

Step 2: Remove The Backing From The Foam Tape

Peel off the protective backing from the foam tape to expose the sticky side.

Step 3: Apply the Foam Tape

Apply the foam tape to all 4 sides of your Guard. Ensure all sides are properly covered without any gaps.

Step 4: Insert and Test Guard

Place the blinds inside of your window recess. Test the blinds by pulling the fabric frame to the left.

Questions & Answers

check_box

What makes Guard different from other blackout blinds?

Guard features a unique track system that eliminates gaps between the blinds and the window frame to ensure total darkness. The dual-layered honeycomb fabric combines non-woven polyester with a reflective thermal barrier to block light, insulate against heat, and reduce noise.

check_box

Is Guard suitable for all window types?

Guard is designed to fit most standard window types, but there are a few considerations.

Guard won't fit windows that are not square. Additionally, the blinds require at least 3 centimeters of unobstructed recess space for proper installation. If your window doesn't meet these criteria, Guard may not be suitable for you.

Here's a list of compatible and incompatible window types to help you determine if our product is the right fit for your home:

✔️ European Windows

✔️ Tilt-and-Turn Windows

✔️ Fixed Windows

✔️ Sliding Windows

✔️ Casement Windows

✔️ Hung Windows

✔️ Sash Windows

✔️ Bay Windows

✔️ Awning Windows

✔️ Skylights

check_box

How do I measure my windows for Guard?

To ensure correct measurements, please read our Measuring Guide. It's important that your measurements are accurate and precise, as they are crucial for the blinds to fit properly. Incorrect measurements will result in the blinds not fitting your windows.

check_box

Does Guard require any special maintenance?

Guard is low-maintenance. The non-woven polyester fabric resists dust and stains, requiring only occasional cleaning with a damp cloth. No special cleaners or treatments are necessary.

check_box

How do I install Guard?

To install Guard, follow our step-by-step instructions in our Installation Guide.

Ready to Order?

With your measurements complete, you're now ready to order Guard with a perfect fit and total blackout.

Order Now